Installing NixOS on a Raspberry Pi

This tutorial assumes Raspberry P 4 Model B with 4GB RAM.

Before starting this tutorial, make sure you have all necessary hardware:

  • HDMI cable/adapter.

  • 8GB+ SD card.

  • SD card reader in case your machine doesn’t have an SD slot.

  • Power cable for your Raspberry Pi.

  • USB keyboard.


This tutorial was written for the Raspberry Pi 4B. Using a previous supported revision, like the 3B or 3B+, is possible with tweaks.

Booting NixOS live image


Booting from USB may require an EEPROM firmware upgrade. This tutorial boots from an SD card to avoid such hiccups.

Prepare the AArch64 image on your laptop:

$ nix-shell -p wget zstd

[nix-shell:~]$ wget
[nix-shell:~]$ unzstd -d nixos-sd-image-22.05pre335501.c71f061c68b-aarch64-linux.img.zst
[nix-shell:~]$ dmesg --follow


You can pick a newer image by going to Hydra job, clicking on a build and copying the link to the build product image.

There is a known problem with the latest SD images on the Pi 4, where it turns off the display while booting up. If you are experiencing such problems, please use the most recent working build instead until the issue is fixed.

Your terminal should be printing kernel messages as they come in.

Plug in your SD card and your terminal should print what device it got assigned, for example /dev/sdX.

Press ctrl-c to stop dmesg --follow.

Copy NixOS to your SD card by replacing sdX with the name of your device:

[nix-shell:~]$ sudo dd if=nixos-sd-image-22.05pre335501.c71f061c68b-aarch64-linux.img of=/dev/sdX bs=4096 conv=fsync status=progress

Once that command exits, move the SD card into your Raspberry Pi and power it on.

You should be greeted with a fresh shell!

In case the image doesn’t boot, it’s worth updating the firmware and booting the image again.

Getting internet connection

Run sudo -i to get a root shell for the rest of the tutorial.

At this point you’ll need an internet connection. If you can use an ethernet cable, plug it in.

If you’re connecting to wifi, run iwconfig to find the name of your wireless network interface. If it’s wlan0, replace SSID and passphrase with your data and run:

# wpa_supplicant -B -i wlan0 -c <(wpa_passphrase 'SSID' 'passphrase') &

Once you see in your terminal that connection is established, run host to check that the DNS resolves correctly.

In case you’ve made a typo, run pkill wpa_supplicant and start over.

Updating firmware

To benefit from updates and bug fixes from the vendor, we’ll start by updating Raspberry Pi firmware:

# nix-shell -p raspberrypi-eeprom
# mount /dev/disk/by-label/FIRMWARE /mnt
# BOOTFS=/mnt FIRMWARE_RELEASE_STATUS=stable rpi-eeprom-update -d -a

Installing NixOS

For the initial installation, we’ll install XFCE desktop environment with user guest and SSH daemon.

{ config, pkgs, lib, ... }:

  user = "guest";
  password = "guest";
  SSID = "mywifi";
  SSIDpassword = "mypassword";
  interface = "wlan0";
  hostname = "myhostname";
in {
  imports = ["${fetchTarball "" }/raspberry-pi/4"];

  fileSystems = {
    "/" = {
      device = "/dev/disk/by-label/NIXOS_SD";
      fsType = "ext4";
      options = [ "noatime" ];

  networking = {
    hostName = hostname;
    wireless = {
      enable = true;
      networks."${SSID}".psk = SSIDpassword;
      interfaces = [ interface ];

  environment.systemPackages = with pkgs; [ vim ];

  services.openssh.enable = true;

  users = {
    mutableUsers = false;
    users."${user}" = {
      isNormalUser = true;
      password = password;
      extraGroups = [ "wheel" ];

  # Enable GPU acceleration
  hardware.raspberry-pi."4".fkms-3d.enable = true;

  services.xserver = {
    enable = true;
    displayManager.lightdm.enable = true;
    desktopManager.xfce.enable = true;

  hardware.pulseaudio.enable = true;

To save time on typing the whole configuration, download it:

# curl -L > /etc/nixos/configuration.nix

At the top of /etc/nixos/configuration.nix there are a few variables that you want to configure, the most important being your wifi connection details, this time specified in declarative way.

Once you’re ready to install NixOS:

# nixos-install --root /
# reboot

If your system doesn’t boot, select the oldest configuration in the bootloader menu to get back to live image and start over.

Making changes

It booted, congratulations!

To make further changes to the configuration, search through NixOS options, edit /etc/nixos/configuration.nix, and update your system:

$ sudo -i
# nixos-rebuild switch

Next steps

  • Once you have a successfully running OS, try upgrading it with nixos-rebuild switch --upgrade and reboot to the old configuration if something broke.

  • To tweak bootloader options affecting hardware, see config.txt options and change the options by running mount /dev/disk/by-label/FIRMWARE /mnt and opening /mnt/config.txt.

  • To see the power of declarative configuration, try replacing xfce with kodi in /etc/nixos/configuration.nix, run nixos-rebuild switch as root and reboot.