Running tests

Coverage analysis

A coverage analysis report is available online You can build it yourself:

# nix build .#hydraJobs.coverage
# xdg-open ./result/coverage/index.html

Extensive records of build metrics, such as test coverage over time, are also available online.

Unit-tests

The unit tests are defined using the googletest and rapidcheck frameworks.

Source and header layout

An example of some files, demonstrating much of what is described below

src
├── libexpr
│   ├── local.mk
│   ├── value/context.hh
│   ├── value/context.cc
│   …
│
├── tests
│   │
│   …
│   └── unit
│       ├── libutil
│       │   ├── local.mk
│       │   …
│       │   └── data
│       │       ├── git/tree.txt
│       │       …
│       │
│       ├── libexpr-support
│       │   ├── local.mk
│       │   └── tests
│       │       ├── value/context.hh
│       │       ├── value/context.cc
│       │       …
│       │
│       ├── libexpr
│       …   ├── local.mk
│           ├── value/context.cc
│           …
…

The tests for each Nix library (libnixexpr, libnixstore, etc..) live inside a directory tests/unit/${library_name_without-nix}. Given a interface (header) and implementation pair in the original library, say, src/libexpr/value/context.{hh,cc}, we write tests for it in tests/unit/libexpr/tests/value/context.cc, and (possibly) declare/define additional interfaces for testing purposes in tests/unit/libexpr-support/tests/value/context.{hh,cc}.

Data for unit tests is stored in a data subdir of the directory for each unit test executable. For example, libnixstore code is in src/libstore, and its test data is in tests/unit/libstore/data. The path to the tests/unit/data directory is passed to the unit test executable with the environment variable _NIX_TEST_UNIT_DATA. Note that each executable only gets the data for its tests.

The unit test libraries are in tests/unit/${library_name_without-nix}-lib. All headers are in a tests subdirectory so they are included with #include "tests/".

The use of all these separate directories for the unit tests might seem inconvenient, as for example the tests are not "right next to" the part of the code they are testing. But organizing the tests this way has one big benefit: there is no risk of any build-system wildcards for the library accidentally picking up test code that should not built and installed as part of the library.

Running tests

You can run the whole testsuite with make check, or the tests for a specific component with make libfoo-tests_RUN. Finer-grained filtering is also possible using the --gtest_filter command-line option, or the GTEST_FILTER environment variable.

Characterisation testing { #characaterisation-testing-unit }

See functional characterisation testing for a broader discussion of characterisation testing.

Like with the functional characterisation, _NIX_TEST_ACCEPT=1 is also used. For example:

$ _NIX_TEST_ACCEPT=1 make libstore-tests_RUN
...
[  SKIPPED ] WorkerProtoTest.string_read
[  SKIPPED ] WorkerProtoTest.string_write
[  SKIPPED ] WorkerProtoTest.storePath_read
[  SKIPPED ] WorkerProtoTest.storePath_write
...

will regenerate the "golden master" expected result for the libnixstore characterisation tests. The characterisation tests will mark themselves "skipped" since they regenerated the expected result instead of actually testing anything.

Unit test support libraries

There are headers and code which are not just used to test the library in question, but also downstream libraries. For example, we do property testing with the rapidcheck library. This requires writing Arbitrary "instances", which are used to describe how to generate values of a given type for the sake of running property tests. Because types contain other types, Arbitrary "instances" for some type are not just useful for testing that type, but also any other type that contains it. Downstream types frequently contain upstream types, so it is very important that we share arbitrary instances so that downstream libraries' property tests can also use them.

It is important that these testing libraries don't contain any actual tests themselves. On some platforms they would be run as part of every test executable that uses them, which is redundant. On other platforms they wouldn't be run at all.

Functional tests

The functional tests reside under the tests/functional directory and are listed in tests/functional/local.mk. Each test is a bash script.

Running the whole test suite

The whole test suite can be run with:

$ make install && make installcheck
ran test tests/functional/foo.sh... [PASS]
ran test tests/functional/bar.sh... [PASS]
...

Grouping tests

Sometimes it is useful to group related tests so they can be easily run together without running the entire test suite. Each test group is in a subdirectory of tests. For example, tests/functional/ca/local.mk defines a ca test group for content-addressed derivation outputs.

That test group can be run like this:

$ make ca.test-group -j50
ran test tests/functional/ca/nix-run.sh... [PASS]
ran test tests/functional/ca/import-derivation.sh... [PASS]
...

The test group is defined in Make like this:

$(test-group-name)-tests := \
  $(d)/test0.sh \
  $(d)/test1.sh \
  ...

install-tests-groups += $(test-group-name)

Running individual tests

Individual tests can be run with make:

$ make tests/functional/${testName}.sh.test
ran test tests/functional/${testName}.sh... [PASS]

or without make:

$ ./mk/run-test.sh tests/functional/${testName}.sh tests/functional/init.sh
ran test tests/functional/${testName}.sh... [PASS]

To see the complete output, one can also run:

$ ./mk/debug-test.sh tests/functional/${testName}.sh tests/functional/init.sh
+(${testName}.sh:1) foo
output from foo
+(${testName}.sh:2) bar
output from bar
...

The test script will then be traced with set -x and the output displayed as it happens, regardless of whether the test succeeds or fails.

Debugging failing functional tests

When a functional test fails, it usually does so somewhere in the middle of the script.

To figure out what's wrong, it is convenient to run the test regularly up to the failing nix command, and then run that command with a debugger like GDB.

For example, if the script looks like:

foo
nix blah blub
bar

edit it like so:

 foo
-nix blah blub
+gdb --args nix blah blub
 bar

Then, running the test with ./mk/debug-test.sh will drop you into GDB once the script reaches that point:

$ ./mk/debug-test.sh tests/functional/${testName}.sh tests/functional/init.sh
...
+ gdb blash blub
GNU gdb (GDB) 12.1
...
(gdb)

One can debug the Nix invocation in all the usual ways. For example, enter run to start the Nix invocation.

Troubleshooting

Sometimes running tests in the development shell may leave artefacts in the local repository. To remove any traces of that:

git clean -x --force tests

Characterisation testing { #characterisation-testing-functional }

Occasionally, Nix utilizes a technique called Characterisation Testing as part of the functional tests. This technique is to include the exact output/behavior of a former version of Nix in a test in order to check that Nix continues to produce the same behavior going forward.

For example, this technique is used for the language tests, to check both the printed final value if evaluation was successful, and any errors and warnings encountered.

It is frequently useful to regenerate the expected output. To do that, rerun the failed test(s) with _NIX_TEST_ACCEPT=1. For example:

_NIX_TEST_ACCEPT=1 make tests/functional/lang.sh.test

This convention is shared with the characterisation unit tests too.

An interesting situation to document is the case when these tests are "overfitted". The language tests are, again, an example of this. The expected successful output of evaluation is supposed to be highly stable – we do not intend to make breaking changes to (the stable parts of) the Nix language. However, the errors and warnings during evaluation (successful or not) are not stable in this way. We are free to change how they are displayed at any time.

It may be surprising that we would test non-normative behavior like diagnostic outputs. Diagnostic outputs are indeed not a stable interface, but they still are important to users. By recording the expected output, the test suite guards against accidental changes, and ensure the result (not just the code that implements it) of the diagnostic code paths are under code review. Regressions are caught, and improvements always show up in code review.

To ensure that characterisation testing doesn't make it harder to intentionally change these interfaces, there always must be an easy way to regenerate the expected output, as we do with _NIX_TEST_ACCEPT=1.

Integration tests

The integration tests are defined in the Nix flake under the hydraJobs.tests attribute. These tests include everything that needs to interact with external services or run Nix in a non-trivial distributed setup. Because these tests are expensive and require more than what the standard github-actions setup provides, they only run on the master branch (on https://hydra.nixos.org/jobset/nix/master).

You can run them manually with nix build .#hydraJobs.tests.{testName} or nix-build -A hydraJobs.tests.{testName}

Installer tests

After a one-time setup, the Nix repository's GitHub Actions continuous integration (CI) workflow can test the installer each time you push to a branch.

Creating a Cachix cache for your installer tests and adding its authorisation token to GitHub enables two installer-specific jobs in the CI workflow:

  • The installer job generates installers for the platforms below and uploads them to your Cachix cache:

    • x86_64-linux
    • armv6l-linux
    • armv7l-linux
    • x86_64-darwin
  • The installer_test job (which runs on ubuntu-latest and macos-latest) will try to install Nix with the cached installer and run a trivial Nix command.

One-time setup

  1. Have a GitHub account with a fork of the Nix repository.
  2. At cachix.org:
    • Create or log in to an account.
    • Create a Cachix cache using the format <github-username>-nix-install-tests.
    • Navigate to the new cache > Settings > Auth Tokens.
    • Generate a new Cachix auth token and copy the generated value.
  3. At github.com:
    • Navigate to your Nix fork > Settings > Secrets > Actions > New repository secret.
    • Name the secret CACHIX_AUTH_TOKEN.
    • Paste the copied value of the Cachix cache auth token.

Working on documentation

Using the CI-generated installer for manual testing

After the CI run completes, you can check the output to extract the installer URL:

  1. Click into the detailed view of the CI run.

  2. Click into any installer_test run (the URL you're here to extract will be the same in all of them).

  3. Click into the Run cachix/install-nix-action@v... step and click the detail triangle next to the first log line (it will also be Run cachix/install-nix-action@v...)

  4. Copy the value of install_url

  5. To generate an install command, plug this install_url and your GitHub username into this template:

    curl -L <install_url> | sh -s -- --tarball-url-prefix https://<github-username>-nix-install-tests.cachix.org/serve